The ProFlex C special feeder features a design that can be flexibly adjusted to any specific space using two feeder sizes and a total of three container sizes. The off-centre arrangement of the augers allows up to eight feeders to be installed in the optimum space. The arrangements for both the drive and augers can be adjusted during installationat the build end-user. Two discharge lengths are available as standardwith feed rates of up to 6000dm3/h. The vertical container walls meanthat every millimetre is used to the maximum and a perfect mass flowis achieved. The material flow is optimised by driving the auger and paddle separately. Driving the paddle using connecting rods and robustbearings makes maintenance work superfluous. The ease with which the containers can be cleaned is another benefit and allows each product change to be processed with little effort. Just two easily accessible sides are needed for service work. The product is rounded off by the Multipoint weighing system with two DMS load cells.
| 